SNMP - Network Autodiscovery
This page covers how to configure and run Simple Network Management Protocol (SNMP) discovery across your network. Learn how to create SNMP discovery jobs, configure credentials, and manage discovered network devices.
See the list of supported hardware vendors for SNMP discovery for compatibility information.
Introduction to SNMP-Based Discovery
SNMP is a widely supported protocol and standard for managing network-connected hardware. There are three broadly deployed versions: SNMP v1, v2c (most commonly used), and v3.
SNMP is typically used in a read-only capacity, but it can support read and write permissions. By default, it uses port 161. SNMP exposes management data in the form of variables, which are organized in a Management Information Base (MIB). An MIB describes the variables available on a given system, each of which can be remotely queried via SNMP.
SNMP discovery supports IPv6 addresses for device discovery.